What To Know
- Locate the juice jug lid and turn it anti-clockwise to remove it from the juicer body.
- Locate the juice pulp container and turn it anti-clockwise to remove it from the juicer body.
The Breville juicer is a high-quality appliance that can last for years if properly maintained. However, over time, parts may become worn or damaged, and it may be necessary for you to take your juicer apart to repair it.
How To Take Breville Juicer Apart
The process of taking apart a Breville juicer can be slightly different depending on the model. However, the general steps are similar. Here are the general steps for disassembling a Breville juicer:
1. Unplug the juicer: Make sure to unplug the juicer before disassembling it to prevent any accidents.
2. Remove the pulp container: The pulp container is usually located at the bottom of the juicer. To remove it, simply lift it up and pull it out.
3. Remove the juice container: The juice container is usually located at the top of the juicer. To remove it, simply lift it up and pull it out.
4. Remove the juicing bowl: The juicing bowl is located at the bottom of the juicer. To remove it, simply lift it up and pull it out.
5. Remove the juicing screen: The juicing screen is located at the top of the juicer. To remove it, simply lift it up and pull it out.
6. Remove the juicing cone: The juicing cone is located at the top of the juicer. To remove it, simply lift it up and pull it out.
7. Clean the parts: Make sure to clean all the parts thoroughly before reassembling the juicer.
8. Reassemble the juicer: Reassemble the juicer by reversing the steps above. Make sure to put the parts in the correct order.
It’s also worth noting that different models may have slightly different parts or steps. If you’re unsure about how to disassemble your specific model, it’s best to refer to the user manual or contact Breville customer service for assistance.
How To Disassemble A Breville Juicer?
- 1. Unplug the juicer from the power outlet and allow it to cool completely.
- 2. Remove the juice jug, pulp container, and any detachable parts from the juicer.
- 3. Locate the locking lever located at the base of the juicer. Lift it up and hold it in place while unscrewing the base.
- 4. Carefully lift the juicing cone and strainer from the base.
- 5. Clean all the components with warm water and a mild detergent. Dry them thoroughly before reassembling the juicer.
What Are The Steps To Disassemble A Breville Juicer?
Disassembling a Breville juicer involves the following steps:
1. Unplug the juicer from the power outlet.
2. Remove the juice jug or container from the juicer base.
3. Locate the pulp ejection chute and turn it anti-clockwise to remove it from the juicer body.
4. Locate the juice strainer and turn it anti-clockwise to remove it from the juicer body.
5. Locate the juicing cone and turn it anti-clockwise to remove it from the juicer body.
6. Locate the juicing bowl and turn it anti-clockwise to remove it from the juicer body.
7. Locate the juicing disc and turn it anti-clockwise to remove it from the juicer body.
8. Locate the juicing basket and turn it anti-clockwise to remove it from the juicer body.
9. Locate the juice jug lid and turn it anti-clockwise to remove it from the juicer body.
10. Locate the pulp ejection chute lid and turn it anti-clockwise to remove it from the juicer body.
11. Locate the juice strainer lid and turn it anti-clockwise to remove it from the juicer body.
12. Locate the juicing bowl lid and turn it anti-clockwise to remove it from the juicer body.
13. Locate the juicing disc lid and turn it anti-clockwise to remove it from the juicer body.
14. Locate the juicing basket lid and turn it anti-clockwise to remove it from the juicer body.
15. Locate the juice jug lid and turn it anti-clockwise to remove it from the juicer body.
16. Locate the juice pulp container and turn it anti-clockwise to remove it from the juicer body.
17. Locate the juice jug lid and turn it anti-clockwise to remove it from the juicer body.
18.
What Are The Tools Needed To Disassemble A Breville Juicer?
Disassembling a Breville juicer requires a few basic tools, including a Phillips screwdriver, a flathead screwdriver, and a wire brush. You may also need a pair of pliers or a wrench to loosen any stubborn parts.
Begin by unplugging the juicer and setting it aside in a safe location. Next, remove any detachable parts, such as the juice container, pulp container, and filter basket. These can usually be removed by unscrewing them by hand or using a screwdriver if necessary.
Once the detachable parts are removed, you can start disassembling the juicer itself. Start by removing the screws that hold the base and motor housing together. Carefully lift off the base and set it aside.
Next, remove the screws that hold the motor housing to the juicing bowl. Lift off the motor housing and set it aside.
Now you can start removing the juicing bowl. It may be attached by screws or clips. Once the juicing bowl is removed, you can clean it thoroughly with a wire brush.
Finally, reassemble the juicer by reversing the steps you took to disassemble it. Make sure to tighten the screws securely to prevent leaks or wobbling.
By following these steps, you can disassemble your Breville juicer for cleaning and maintenance. It’s important to regularly disassemble and clean your juicer to keep it running smoothly and to prevent clogs and other problems.
What Are The Safety Precautions To Follow When Disassembling A Breville Juicer?
When disassembling a Breville juicer, it is important to follow safety precautions to avoid injuries. Here are some precautions to follow:
1. Always unplug the juicer before disassembling it.
2. Wear gloves to protect your hands from cuts and scrapes.
3. Use a clean cloth or paper towel to wipe any food or liquid from the juicer before disassembling it.
4. Use a small screwdriver or Allen wrench to remove any screws or fasteners that hold different parts of the juicer together.
5. Never use force when removing parts. If a part is difficult to remove, try using a lubricant such as WD-40 or vegetable oil to loosen it.
6. Keep small parts in a safe place so they don’t get lost.
7. Follow the instructions in the user manual when assembling the juicer.
8. Never use the juicer if it is not assembled correctly.
9. Always store the juicer in a safe place when not in use.
10. Never use the juicer if there are any loose parts or if it is damaged in any way.
By following these safety precautions, you can safely disassemble and reassemble your Breville juicer.
Are There Any Specific Instructions To Follow When Disassembling A Breville Juicer?
Disassembling a Breville juicer can be a straightforward process, but it’s important to follow the correct steps to avoid damaging the appliance. Here are some general instructions to follow when disassembling a Breville juicer:
1. Unplug the juicer from the power source and allow it to cool down completely before attempting disassembly.
2. Locate the screws that hold the various components of the juicer together. These screws are usually located on the underside of the juicer, near the motor.
3. Use a Phillips screwdriver to remove the screws. Be careful not to lose the screws, as they will be needed for reassembly.
4. Carefully disassemble the juicer, taking note of the order in which the various parts are removed. Some Breville juicers may have specific instructions or diagrams for disassembly, so refer to the user’s manual or online resources if necessary.
5. Clean the disassembled parts thoroughly, using a soft cloth or brush to remove any food debris or buildup.
6. Reassemble the juicer, following the steps in reverse. Make sure to tighten the screws securely to avoid leaks or loose parts.
By following these general instructions, you should be able to safely disassemble a Breville juicer for cleaning or maintenance. It’s important to be careful when handling the parts of the juicer, as they may be sharp or fragile.
Final Note
In conclusion, the Breville juicer is a high-quality appliance that requires regular maintenance to keep it running smoothly. Taking it apart for cleaning and maintenance is not difficult, but it is important to follow the instructions in the user manual and to take your time. With a little care and attention, you can keep your Breville juicer in good condition for years to come.
