What To Know
- A custom-sewn KitchenAid stand mixer cover is the perfect solution to keep your mixer dust-free, prevent scratches, and add a touch of style to your kitchen.
- Press with an iron and topstitch around the edges to create a casing for the drawstring.
- Topstitch around the edges of the cover to secure the hem and give it a finished look.
If you’re an avid baker or home cook, you know the importance of keeping your kitchen appliances protected. A custom-sewn KitchenAid stand mixer cover is the perfect solution to keep your mixer dust-free, prevent scratches, and add a touch of style to your kitchen.
Materials You’ll Need:
- Fabric (cotton, canvas, or other durable material)
- Measuring tape or ruler
- Scissors
- Sewing machine
- Thread
- Iron and ironing board
- Elastic cord (optional)
Step-by-Step Instructions:
1. Measure and Cut the Fabric
- Measure the width and height of your mixer, including the bowl.
- Add 2 inches to the width and height for seam allowance.
- Cut two rectangles of fabric to these measurements.
2. Hem the Edges
- Fold over the edges of the fabric by 1 inch and press with an iron.
- Fold over the edges again by 1 inch and press.
- Topstitch the edges to secure the hem.
3. Create the Drawstring Casing
- Fold over the top edge of one of the fabric rectangles by 2 inches.
- Press with an iron and topstitch around the edges to create a casing for the drawstring.
4. Insert the Drawstring
- Cut a piece of elastic cord twice the width of your mixer.
- Thread the elastic cord through the drawstring casing using a safety pin or bodkin.
- Tie the ends of the elastic cord together to form a loop.
5. Sew the Side Seams
- Place the two fabric rectangles right sides together and pin the side seams.
- Sew the side seams using a 1/2-inch seam allowance.
6. Attach the Drawstring Casing
- Align the drawstring casing of one fabric rectangle with the top edge of the other fabric rectangle.
- Pin and sew the drawstring casing to the top edge.
7. Topstitch the Cover
- Fold over the raw edges of the cover by 1/4 inch and press with an iron.
- Topstitch around the edges of the cover to secure the hem and give it a finished look.
Personalize Your Cover:
- Embroider your mixer cover with your name or a special design.
- Add a decorative trim or ribbon to the edges for a touch of flair.
- Choose a fabric that matches your kitchen décor or personal style.
Final Thoughts:
Sewing a KitchenAid stand mixer cover is a rewarding project that can protect and enhance your beloved appliance. With a little bit of time and effort, you can create a custom cover that will keep your mixer looking its best for years to come.
Frequently Asked Questions:
Q: What type of fabric is best for a mixer cover?
A: Durable fabrics like cotton, canvas, or denim are ideal as they can withstand frequent use and washing.
Q: Can I use a different type of closure instead of a drawstring?
A: Yes, you can use Velcro, snaps, or buttons to secure the cover.
Q: How often should I wash my mixer cover?
A: Wash the cover as needed, especially if it becomes dusty or stained. Use a gentle cycle and mild detergent.
