What To Know
- If the clock is not displaying the correct time, adjust it by pressing the “Clock” button and using the number pad to set the desired time.
- To ensure the reset was successful, run a test cycle by placing a cup of water in the microwave and heating it for a few minutes.
- The door switch is responsible for turning on the microwave when the door is closed.
Experiencing an issue with your Kenmore microwave? A simple reset can often resolve minor glitches and restore its functionality. Follow these detailed instructions to learn how to reset your Kenmore microwave and get it back in working order.
Unplug the Microwave
1. Safety First: Always unplug the microwave from the power outlet before proceeding with any troubleshooting or resetting. This ensures your safety from electrical hazards.
Wait for 30 Seconds
2. Power Discharge: After unplugging the microwave, wait for approximately 30 seconds to allow any remaining power to discharge. This will reset the microwave’s internal circuitry.
Replug the Microwave
3. Reconnect Power: After waiting, firmly plug the microwave back into the power outlet. This will restore power to the appliance.
Check the Display
4. Reset Confirmation: Once plugged in, the microwave’s display should show a reset time of “0:00” or “12:00.” This confirms that the reset has been successful.
Set the Clock
5. Time Adjustment: If the clock is not displaying the correct time, adjust it by pressing the “Clock” button and using the number pad to set the desired time.
Clear Error Codes
6. Error Elimination: If your microwave was displaying error codes prior to the reset, they should now be cleared. If the error codes persist, contact Kenmore support for further assistance.
Run a Test Cycle
7. Functionality Check: To ensure the reset was successful, run a test cycle by placing a cup of water in the microwave and heating it for a few minutes. If the microwave heats the water without any issues, the reset was successful.
Troubleshooting Tips
If you are still experiencing issues after resetting your Kenmore microwave, consider the following troubleshooting tips:
- Check the Power Outlet: Ensure that the power outlet is functioning properly by plugging another appliance into it.
- Inspect the Door Switch: The door switch is responsible for turning on the microwave when the door is closed. Inspect the switch for any damage or debris that may prevent it from making contact.
- Clean the Microwave: A dirty microwave can cause various issues. Clean the interior and exterior thoroughly to remove any food residue or grease buildup.
- Contact Kenmore Support: If all else fails, contact Kenmore support for professional assistance.
Resetting Different Kenmore Microwave Models
8. Kenmore Elite Microwave:
- Unplug the microwave.
- Wait 1 minute.
- Replug the microwave and press the “Clear/Off” button twice.
- Enter the code “12345” using the number pad.
- Press the “Start” button.
9. Kenmore Over-the-Range Microwave:
- Unplug the microwave.
- Wait 30 seconds.
- Replug the microwave.
- Press the “Clock” button.
- Enter the time using the number pad.
- Press the “Start” button.
10. Kenmore Built-In Microwave:
- Unplug the microwave.
- Wait 60 seconds.
- Replug the microwave.
- Press the “Stop/Clear” button twice.
- Enter the code “0000” using the number pad.
- Press the “Start” button.
Frequently Asked Questions (FAQ)
1. How often should I reset my Kenmore microwave?
You do not need to reset your microwave regularly unless you experience issues or need to clear error codes.
2. What does it mean if my Kenmore microwave displays an “F” error code?
An “F” error code typically indicates a problem with the door switch. Inspect the switch for damage or debris.
3. Can I reset my Kenmore microwave using the remote control?
No, you cannot reset your Kenmore microwave using the remote control. You must unplug and replug the microwave to reset it.
