What To Know
- In this comprehensive guide, we will walk you through the steps of how to replace a Frigidaire oven heating element.
- Set the multimeter to the ohms setting and touch the probes to the terminals of the heating element.
- Can I use a heating element from a different oven model.
Is your Frigidaire oven leaving you cold in the kitchen? A faulty heating element could be the culprit behind your culinary woes. Replacing it is a relatively straightforward task that you can tackle yourself with the right tools and instructions. In this comprehensive guide, we will walk you through the steps of how to replace a Frigidaire oven heating element.
Tools and Materials
Before you begin, gather the following tools and materials:
- New Frigidaire oven heating element
- Screwdriver
- Nut driver or wrench
- Multimeter (optional)
- Safety gloves
- Safety glasses
Safety Precautions
Electrical work can be hazardous. Always follow these safety precautions:
- Unplug your oven from the power source.
- Wear safety gloves and glasses to protect yourself from electrical shock and debris.
- Allow the oven to cool completely before touching any electrical components.
Step-by-Step Instructions
1. Remove the Oven Door
Open the oven door and locate the two screws on the top hinges. Remove the screws and carefully lift the door off the oven.
2. Access the Heating Element
Locate the heating element at the bottom of the oven. It will be held in place by two or four screws. Remove the screws and pull the heating element towards you to detach it from the oven.
3. Disconnect the Electrical Wiring
Carefully disconnect the electrical wires from the heating element. Note the position of the wires before detaching them.
4. Test the Heating Element (Optional)
If you have a multimeter, you can test the heating element for continuity. Set the multimeter to the ohms setting and touch the probes to the terminals of the heating element. A reading of zero indicates continuity, while an infinite reading indicates a break in the element.
5. Install the New Heating Element
Insert the new heating element into the oven and align it with the holes. Secure it in place with the screws.
6. Reconnect the Electrical Wiring
Connect the electrical wires to the terminals of the heating element. Make sure the wires are firmly attached.
7. Reinstall the Oven Door
Carefully lift the oven door back onto the hinges and secure it with the screws.
Troubleshooting
If you encounter any issues during the replacement process, here are some troubleshooting tips:
- Oven is not heating: Ensure that the heating element is properly installed and connected. Check the electrical wires for any breaks or loose connections.
- Heating element is glowing unevenly: The heating element may be damaged or not properly aligned. Replace the heating element or adjust its position.
- Oven is overheating: The thermostat may be faulty. Contact a qualified appliance repair technician.
Wrapping Up
Replacing a Frigidaire oven heating element is a task that most DIYers can handle. By following these steps and taking proper safety precautions, you can restore your oven to working order and enjoy delicious home-cooked meals once again.
Questions We Hear a Lot
1. How often should I replace my oven heating element?
The lifespan of an oven heating element varies depending on usage. However, most elements should last for several years.
2. Can I use a heating element from a different oven model?
No, it is crucial to use a heating element designed specifically for your Frigidaire oven model.
3. What are the signs of a faulty heating element?
- Oven is not heating
- Heating element is glowing unevenly
- Oven is overheating
