What To Know
- Over-the-range microwaves are a convenient way to save space in your kitchen, but when it comes time to remove them, it can be a bit of a challenge.
- Use a screwdriver to remove the screws that secure the bracket to the microwave.
- Removing a Kenmore microwave over stove is a straightforward task that can be completed in less than an hour.
Over-the-range microwaves are a convenient way to save space in your kitchen, but when it comes time to remove them, it can be a bit of a challenge. If you’re tackling this task yourself, follow these step-by-step instructions to ensure a safe and successful removal:
Safety Precautions
Before you begin, unplug the microwave from the power outlet. Also, be sure to wear gloves and safety glasses to protect yourself from any sharp edges or electrical components.
Removing the Mounting Bracket
1. Locate the mounting bracket that holds the microwave in place. It’s usually located on the top of the microwave, near the back.
2. Use a screwdriver to remove the screws that secure the bracket to the microwave.
3. Carefully lift the microwave up and off the bracket.
Disconnecting the Electrical Wires
1. Once the microwave is removed from the bracket, you’ll need to disconnect the electrical wires.
2. Locate the electrical junction box, which is usually located behind the microwave.
3. Turn off the circuit breaker that powers the microwave.
4. Remove the cover from the junction box.
5. Disconnect the wires from the microwave. Make sure to note which wire goes where for reinstallation.
Removing the Microwave from the Cabinet
1. Open the microwave door.
2. Locate the screws that secure the microwave to the cabinet. They’re usually located on the sides or bottom of the microwave.
3. Remove the screws.
4. Carefully pull the microwave forward and out of the cabinet.
Reinstalling the Microwave
Once you’ve removed the microwave, you can reinstall it by following the steps in reverse order. Be sure to:
- Reconnect the electrical wires.
- Secure the microwave to the mounting bracket.
- Screw the microwave into the cabinet.
- Plug the microwave back into the power outlet.
Troubleshooting Tips
The microwave won’t turn on after I reinstall it.
- Check that the electrical wires are properly connected.
- Make sure that the circuit breaker is turned on.
- Reset the microwave by pressing the “Reset” button.
The microwave door won’t open after I reinstall it.
- Check that the door latch is properly engaged.
- Make sure that the microwave is not in “Child Lock” mode.
- Reset the microwave by pressing the “Reset” button.
Summary: Microwave Mastery
Removing a Kenmore microwave over stove is a straightforward task that can be completed in less than an hour. By following these instructions carefully, you can safely remove your microwave and enjoy the freedom of a clutter-free kitchen.
Frequently Discussed Topics
Q: Can I remove the microwave myself?
A: Yes, you can remove the microwave yourself with the proper tools and safety precautions.
Q: What tools do I need to remove the microwave?
A: You will need a screwdriver, gloves, and safety glasses.
Q: How long will it take to remove the microwave?
A: It should take less than an hour to remove the microwave.
Q: What should I do if I’m not comfortable removing the microwave myself?
A: If you’re not comfortable removing the microwave yourself, you can call a qualified appliance repair technician.
Q: What should I do with the old microwave?
A: You can recycle the old microwave at a local recycling center.
