What To Know
- Use a wrench to loosen the bolts that secure the griddle top to the frame.
- Use a screwdriver to remove the screws that secure the burner assembly to the frame.
- Use a screwdriver to remove the screws that secure the ignition switch to the frame.
Blackstone griddles have become a popular choice for outdoor cooking enthusiasts due to their versatility and ability to cook a wide variety of foods. However, over time, even the most well-maintained griddles can start to show signs of wear and tear. If your Blackstone griddle is starting to look a little worse for wear, don’t despair! With a little bit of time and effort, you can easily redo it and restore it to its former glory.
Materials You’ll Need
Before you begin, gather the following materials:
- New griddle top
- New burner assembly
- New ignition switch
- New control knobs
- New grease cup
- New propane tank
- Wrenches
- Screwdriver
- Pliers
Step-by-Step Instructions
1. Safety First
Before you start working on your griddle, make sure to disconnect the propane tank and let the griddle cool down completely.
2. Remove the Old Griddle Top
Use a wrench to loosen the bolts that secure the griddle top to the frame. Once the bolts are loose, carefully lift the griddle top off the frame.
3. Remove the Old Burner Assembly
Use a screwdriver to remove the screws that secure the burner assembly to the frame. Once the screws are removed, carefully lift the burner assembly out of the frame.
4. Remove the Old Ignition Switch
Use a screwdriver to remove the screws that secure the ignition switch to the frame. Once the screws are removed, carefully pull the ignition switch out of the frame.
5. Remove the Old Control Knobs
Use a screwdriver to remove the screws that secure the control knobs to the frame. Once the screws are removed, carefully pull the control knobs off the frame.
6. Remove the Old Grease Cup
Use a wrench to loosen the bolt that secures the grease cup to the frame. Once the bolt is loose, carefully remove the grease cup from the frame.
7. Install the New Griddle Top
Place the new griddle top on the frame and secure it with the bolts. Tighten the bolts until they are snug.
8. Install the New Burner Assembly
Place the new burner assembly in the frame and secure it with the screws. Tighten the screws until they are snug.
9. Install the New Ignition Switch
Insert the new ignition switch into the frame and secure it with the screws. Tighten the screws until they are snug.
10. Install the New Control Knobs
Insert the new control knobs into the frame and secure them with the screws. Tighten the screws until they are snug.
11. Install the New Grease Cup
Insert the new grease cup into the frame and secure it with the bolt. Tighten the bolt until it is snug.
12. Connect the Propane Tank
Connect the propane tank to the griddle and tighten the connection.
13. Test the Griddle
Turn on the propane tank and ignite the griddle. Adjust the control knobs to the desired temperature and let the griddle heat up. Once the griddle is hot, cook a test meal to ensure that everything is working properly.
Seasoning Your New Griddle
Once you have redone your griddle, it is important to season it before using it for the first time. Seasoning helps to protect the griddle from rust and corrosion, and it also helps to improve the cooking surface. To season your griddle, follow these steps:
1. Apply a thin layer of vegetable oil to the cooking surface.
2. Heat the griddle over medium heat for 30 minutes.
3. Let the griddle cool completely.
4. Repeat steps 1-3 two more times.
Troubleshooting
If you encounter any problems while redoing your griddle, consult the following troubleshooting tips:
- The griddle won’t ignite. Check the propane tank connection and make sure that the tank is full. Also, check the ignition switch and make sure that it is working properly.
- The griddle doesn’t heat up evenly. Make sure that the burner assembly is properly installed and that all of the burners are lit.
- The griddle is smoking. This is usually caused by grease buildup. Clean the griddle regularly to prevent this from happening.
- The griddle is rusting. If your griddle is starting to rust, you can remove the rust with a wire brush and then apply a new coat of paint.
Final Thoughts: Restore Your Blackstone Griddle to Its Former Glory
