What To Know
- Check if the bubble in the level is centered, indicating the range is level from front to back.
- Check if the bubble in the level is centered, indicating the range is level from side to side.
- The ideal height for a Whirlpool electric range is between 36 and 38 inches from the floor to the top of the cooking surface.
Maintaining a level Whirlpool electric range is crucial for its optimal performance and safety. An uneven range can result in uneven cooking, energy inefficiency, and even potential hazards. This comprehensive guide will provide you with step-by-step instructions on how to level your Whirlpool electric range quickly and effectively.
Materials You’ll Need
- Level
- Adjustable wrench
- Screwdriver
- Shims (optional)
Step-by-Step Instructions
1. Turn Off the Range and Unplug It
Before beginning any adjustments, ensure the range is turned off and unplugged from the power outlet. This will prevent any electrical accidents.
2. Locate the Leveling Feet
Most Whirlpool electric ranges have four adjustable leveling feet located at each corner of the base. These feet allow you to adjust the height of the range.
3. Place the Level on the Range
Place the level on the top surface of the range, parallel to the front edge. Check if the bubble in the level is centered, indicating the range is level from front to back.
4. Adjust the Front Feet
Using an adjustable wrench, turn the front leveling feet clockwise to raise the front of the range or counterclockwise to lower it. Adjust the feet until the bubble in the level is centered.
5. Place the Level on the Side
Place the level on the side of the range, parallel to the left edge. Check if the bubble in the level is centered, indicating the range is level from side to side.
6. Adjust the Side Feet
Using an adjustable wrench, turn the side leveling feet clockwise to raise that side of the range or counterclockwise to lower it. Adjust the feet until the bubble in the level is centered.
7. Repeat Steps 5-6 for the Other Side
Repeat steps 5 and 6 for the other side of the range to ensure it is level in both directions.
Using Shims (Optional)
If the range is still not level after adjusting the feet, you may need to use shims. Shims are thin pieces of material that can be placed under the leveling feet to raise the range further.
Fine-Tuning the Level
Once the range is approximately level, you can fine-tune the leveling by placing the level on the cooking surface. Adjust the leveling feet slightly until the bubble in the level is centered on all surfaces.
Checking the Level Regularly
It is recommended to check the level of your Whirlpool electric range periodically, especially after moving it or if you notice any uneven cooking. By following these instructions, you can ensure your range remains level and provides optimal performance.
Troubleshooting
Range Still Not Level
- Ensure all four leveling feet are making contact with the floor.
- Check for any debris or obstructions under the leveling feet.
- Use shims to raise the range further if necessary.
Range Wobbles
- Check if the leveling feet are tightened securely.
- Ensure the floor under the range is level and stable.
- Contact a qualified technician if the range continues to wobble.
Uneven Cooking
- Verify that the range is level in all directions.
- Check the heating elements to ensure they are functioning properly.
- Adjust the temperature settings as needed.
Information You Need to Know
How often should I level my Whirlpool electric range?
It is recommended to check the level of your range periodically, especially after moving it or if you notice any uneven cooking.
Can I use a carpenter’s level instead of a spirit level?
Yes, a carpenter’s level can be used, but it is less accurate than a spirit level.
What is the ideal height for a Whirlpool electric range?
The ideal height for a Whirlpool electric range is between 36 and 38 inches from the floor to the top of the cooking surface.
