What To Know
- Use a Phillips head screwdriver to remove the screws securing the feed chute to the base.
- Use a flathead screwdriver to loosen the screw holding the cutting disc in place.
- Use a Phillips head screwdriver to remove the screws securing the motor housing to the base.
Disassembling your Breville juicer is a crucial step for maintenance and cleaning. By following these detailed instructions, you can disassemble your juicer safely and effectively, ensuring its optimal performance and longevity.
Safety Precautions
Before starting, ensure the following safety precautions:
- Unplug the juicer from the power outlet.
- Allow the juicer to cool down completely.
- Wear gloves to protect your hands from sharp blades.
Materials Required
- Phillips head screwdriver
- Flathead screwdriver
- Allen key (if applicable)
- Soft cloth or brush
- Cleaning solution
Step-by-Step Disassembly Instructions
1. Remove the Pulp Container
- Grip the pulp container and pull it straight up to detach it from the base.
- Empty the pulp and clean it with a damp cloth.
2. Remove the Feed Chute
- Use a Phillips head screwdriver to remove the screws securing the feed chute to the base.
- Lift the feed chute to remove it.
- Clean the feed chute with a damp cloth.
3. Remove the Cutting Disc and Mesh Filter
- Use a flathead screwdriver to loosen the screw holding the cutting disc in place.
- Pull the cutting disc out of the base.
- Remove the mesh filter from the cutting disc.
- Clean the cutting disc and mesh filter with a damp cloth.
4. Remove the Motor Housing (if applicable)
- For some Breville juicer models, the motor housing is removable.
- Use a Phillips head screwdriver to remove the screws securing the motor housing to the base.
- Carefully lift the motor housing off the base.
5. Remove the Blades
- Use an Allen key to remove the screws securing the blades to the motor shaft.
- Pull the blades off the motor shaft.
- Clean the blades with a damp cloth.
6. Clean the Base
- Use a damp cloth to wipe down the base of the juicer.
- Remove any remaining pulp or debris.
7. Reassembly
- Reverse the disassembly steps to reassemble the juicer.
- Ensure all parts are securely fastened and properly aligned.
Tips for Maintenance and Cleaning
- Regularly clean all parts of your Breville juicer after each use.
- Use a soft cloth or brush to remove any pulp or debris.
- Rinse the cutting disc and mesh filter thoroughly with water.
- Avoid using abrasive cleaners or harsh chemicals.
- Lubricate the cutting disc with a food-grade lubricant periodically.
Troubleshooting
- If the juicer is not operating properly, check the following:
- Ensure the juicer is properly assembled.
- Check the power cord for any damage.
- Clean the cutting disc and mesh filter.
- Lubricate the cutting disc.
Questions You May Have
Q: How often should I disassemble my Breville juicer for cleaning?
A: Disassemble and clean your juicer after each use or as needed.
Q: Can I use the dishwasher to clean the parts of my Breville juicer?
A: No, it is not recommended to wash the parts of your Breville juicer in the dishwasher.
Q: Where can I find replacement parts for my Breville juicer?
A: You can find replacement parts for your Breville juicer on the Breville website or from authorized retailers.
