What To Know
- Gently scrub the interior and exterior surfaces with a soft-bristled brush to remove any pulp or debris.
- Use a small brush or toothpick to gently clean any debris lodged in the small crevices of the auger.
- Use a damp cloth to wipe the exterior of the base, removing any spills or debris.
Maintaining a clean and hygienic NutriBullet slow juicer is crucial for optimal performance and longevity. This comprehensive guide will empower you with step-by-step instructions and expert tips to ensure your juicer stays sparkling and ready for action.
Disassembling Your NutriBullet Slow Juicer
1. Unplug the juicer: Safety first! Always disconnect the power cord before disassembling.
2. Remove the pulp container: Lift the pulp container straight up and off the base.
3. Detach the juice jug: Twist the juice jug counterclockwise to separate it from the base.
4. Remove the auger: Pull the auger straight up and out of the base.
Cleaning the Pulp Container and Juice Jug
1. Rinse with water: Flush the pulp container and juice jug thoroughly with lukewarm water.
2. Use a soft brush: Gently scrub the interior and exterior surfaces with a soft-bristled brush to remove any pulp or debris.
3. Wash with dish soap: Fill the pulp container and juice jug with warm, soapy water. Shake or swish the mixture to loosen any remaining particles.
4. Rinse again: Rinse both components thoroughly with clean water to remove any soap residue.
Cleaning the Auger
1. Remove the rubber seal: Carefully pull the rubber seal off the auger.
2. Clean the seal: Rinse the seal under warm water and gently remove any debris with a soft cloth.
3. Wipe the auger: Use a damp cloth to wipe down the auger, removing any pulp or juice residue.
4. Clean the crevices: Use a small brush or toothpick to gently clean any debris lodged in the small crevices of the auger.
Cleaning the Base
1. Wipe down the exterior: Use a damp cloth to wipe the exterior of the base, removing any spills or debris.
2. Clean the power cord: Wipe the power cord with a damp cloth to remove any dust or dirt.
3. Inspect the power plug: Check the power plug for any damage or loose connections.
Reassembling Your NutriBullet Slow Juicer
1. Insert the auger: Align the auger with the base and push it down until it clicks into place.
2. Attach the rubber seal: Place the rubber seal over the auger and ensure it fits snugly.
3. Secure the juice jug: Align the juice jug with the base and twist it clockwise until it locks.
4. Insert the pulp container: Place the pulp container on top of the base and press it down until it clicks into place.
Tips for Maintaining Your NutriBullet Slow Juicer
- Clean after every use: This prevents pulp and juice from hardening and becoming difficult to clean.
- Use a soft brush: Harsh brushes can damage the components.
- Avoid using bleach or harsh chemicals: These can damage the plastic and rubber parts.
- Store properly: Keep the juicer in a cool, dry place when not in use.
Troubleshooting Common Cleaning Issues
- Pulp stuck in the auger: Use a small brush or toothpick to gently remove the pulp.
- Juice leaking from the base: Check the rubber seal for damage or wear and replace if necessary.
- Juicer not working after cleaning: Ensure all components are securely reassembled and the power cord is properly connected.
The Importance of Regular Cleaning
Regular cleaning of your NutriBullet slow juicer not only ensures optimal performance but also:
- Prevents bacterial growth
- Extends the lifespan of the juicer
- Maintains the juicer’s efficiency in extracting juice
- Enhances the taste and quality of your juices
Answers to Your Most Common Questions
1. How often should I clean my NutriBullet slow juicer?
- After every use
2. Can I use dishwasher detergent to clean the components?
- No, use only mild dish soap and water.
3. What should I do if my juicer is not working after cleaning?
- Check the power cord, power plug, and ensure all components are properly reassembled.
